|
Model |
LTPF247F | LTPF247E | LTPF347F | LTPF347E | |
| Printing | Method |
Thermal line
dot printing |
|||
| Number of dots/line |
432 |
576 |
|||
| Resolution(dots/mm) |
8 |
||||
| Paper width(mm) |
58  |
80 |
|||
| Printing width(mm) |
54 |
72 |
|||
| Speed(mm/sec) max |
220 |
100 |
220 |
100 |
|
| Paper path |
Curved |
||||
| Detection | Head temperature |
By thermistor |
|||
| Platen position detection |
By mechanical
switch |
||||
| Out of paper detection |
By photo
interrupter |
||||
| Power Supply(V) | Operation voltage(Vdd) |
4.75 to 5.25 |
|||
| Operation voltage(Vp) |
21.6 to 26.4 |
||||
| Peak current(A) | Head | 5.4(26.4V/128dots) | 2.6(26.4V/144dots) | 5.4(26.4V/128dots) | 2.6(26.4V/144dots) |
| Motor |
0.46 |
0.55 |
0.46 |
0.55 |
|
| Service Life | Pulse activation(pulse) |
100million |
|||
| Abrasion resistance(km) |
100*1 |
||||
| Operating temperature(°C) |
0 to 50 |
||||
| Dimensions(WxHxD mm) |
86.2 x 54.0
x 25.8*2 |
110.2 x 54.0 x 25.8*2 |
|||
| Mass(g) |
Approx.150 |
Approx.175 |
|||
| *1 Use recommended thermal papers *2Excluding protrusion Windows ® is the registered trademark of Microsoft Corporation (USA). |
| Interface |
||||
| Model |
IFF001-01B |
IFF001-01BK | IFF201-01TK | |
| CPU | PTF00P01 |
IFF201 only |
||
| Thermal printer | LTPF247F,LTPF347F |
LTPF247E,LTPF347E |
||
| Operating voltage(V) | Vp:21.6
to 26.4, Vcc:4.5 to 5.5 |
Vp:21.6 to 26.4 |
||
| Character matrix(HxW dots) | 16 dots
characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24 |
|||
| Character type | Optional font | Yes |
Yes |
Yes |
| Downloaded character | Yes |
Yes |
Yes |
|
| User-defined character | Yes |
Yes |
Yes |
|
| Extend graphics character set | Yes |
Yes |
Yes |
|
| Katakana character set | No |
Yes |
Yes |
|
| JIS 1&2 level kanji | No |
Yes |
Yes |
|
| Communication interface | Parallel,
Serial(C-MOS) |
Parallel,
Serial(RS-232C), USB |
||
| Dimensions(WxHxD mm) | 80.0 x
100.0 x 19.6 |
87.0x72.0x12.0 |
||
|
CPU |
||
Model |
PTF00P01 |
PTF20P01 |
| Thermal printer | LTPF247F,LTPF347F |
LTPF247E,LTPF347E |
| Package form | 144pin
QFP |
128pin QFP |
| Operating voltage(V) | Vp:21.6
to 26.4, Vcc:4.5 to 5.5 |
Vp:21.6 to 26.4, Vcc:4.75 to 5.25 |
| Operating frequency(MHz) | 27+/-0.5% |
18.43+/-0.5% |
| Configuration | C-MOS
LSI |
|
| Communication interface | Parallel,
Serial |
|
| Character type | Extended graphics character set Other characters are available with CGs*3 or external ROM |
|
| Character matrix(H x W dots) | 16dots characters : 16 x 8, 16 x 16 24dots characters : 24 x 12, 24 x 24 |
|
| Dimensions(WxHxD mm) | 22.0 x 22.0 x 3.05 |
22.0 x 16.0 x 3.15 |
*3 CG ROM: Japanese,
Korean |
| Auto Cutter | |||||
|
Model |
ACUF224J | ACUF224H | ACUF324J | ACUF324H | |
|
Thermal
Printer |
LTPF247 |
LTPF347 |
|||
| Cutting | Method |
Slide type |
|||
| Paper width(mm) |
58 |
80 |
|||
| Paper thickness(µm) | 60 to 80 *4 |
||||
| Cutting type | Partial cut (Leave center point) |
Full cut |
Partial cut (Leave center point) |
Full cut |
|
| Operating time (sec/cycle) max |
0.6 (24V on) |
||||
| Cutting pitch(mm) min | 10 |
||||
| Cut frequency (cut/min) max |
30 |
||||
| Operating Voltage(V) | Motor |
21.6 to 26.4 |
|||
| Detector(control switch) | 4.5 to 5.5 |
||||
| Starting Current (A) |
1.2 |
||||
| Life(cut) |
1,000,000 *5 |
||||
| Dimensions(WxHxD mm) |
80.0 x 64.0 x 19.0 |
102.0 x 64.0 x 19.0 |
|||
| Mass(g) |
Approx.130 |
Approx.150 |
|||
*4 Use recommended
thermal papers *5 Depending upon specified conditions. |
|
Winder Unit |
|
|
Model
|
WU282 |
| Thermal printer |
LTPF247F |
| Paper width(mm) | 58 |
| Paper thickness(µm) | 70 to 80 |
| Outside diameter of paper roll(mm) max | Ø83 |
| Inside diameter of paper roll(mm) min | Ø20 |
| Operating voltage(V) | 21.6 to 26.4 |
| Speed(mm/s) max | 220 |
| Life (operationg hours) | 160 |
| Dimensions(WxHxD mm) | 87.8 x 92.0 x 97.6
|
| Mass(g) | Approx.136 |