.jpg)
| Model
|
CAPC235 | CAPC245 |
|
| Printing | Method | Thermal
line dot printing |
|
| Number of dots/line | 288 |
384 |
|
| Resolution(dots/mm) | 6 |
8 |
|
| Paper width(mm) | 58  |
||
| Printing width(mm) | 48 |
||
| Speed(mm/sec) max | 60 |
65 |
|
| Paper path | Curved |
||
| Detection | Head temperature | By thermistor |
|
| Platen position detection | By mechanical
switch |
||
| Out of Paper detection | By photo
interrupter |
||
| Cutter home position | By mechanical
switch |
||
| Power supply(V) | Operation Voltage(Vdd) | 4.75 to
5.25 |
|
| Operation Voltage(Vp) | 5.0 to
8.0 |
||
| Peak current(A) | Head | 4.6 (8V/144dot on) |
4.3 (8V/96dot on) |
| Motor | 0.82 (8V on) |
||
| Cutter | 2.2 |
||
| Cutting | Method | Slide type |
|
| Cutting type | Partial (Right side single
edge point remained) |
||
| Paper thickness (µm) | 54 to 80 *1 |
||
| Cutting pitch (mm)min | 10 |
||
| Operating time (sec/cycle) max | 1 |
||
| Cut frequency (cut/min) max | 30 |
||
| Service life | Pulse activation(pulse) | 50 million |
100 million |
| Abrasion resistance(km) | 50 |
||
| Life (cut) | 500,000 |
||
| Operating temperature(°C) | 0 to 50 |
||
| Dimensions(WxHxD mm) | 71.1 x
88.6 x 29.0 *2 |
||
| Mass(g) | Approx.220 |
||
*1 Use recommended thermal
papers *2 Excluding protrusion |
| CPU |
||
| Model
|
PT800P01 | |
| Thermal printer |
CAPC235 | CAPC245 |
| Package form | 80pin
QFP |
|
| Operating Voltage(V) | Vp:5.0
to 8.0, Vcc:4.5 to 5.5 |
|
| Operating frequency(MHz) | 5+0.5% |
|
| Configuration | C-MOS
LSI |
|
| Communication interface | Parallel,
Serial |
|
| Character type | Extended graphics character
set Other characters are available with CGs*1 or external ROM |
|
| Character matrix(HxW dots) | 16 dots characters: 16*8, 16*16 |
|
24 dots characters: 24*12, 24*24 |
||
| Dimensions(WxHxD mm) | 17.2
x 17.2 x 1.7 |
|
*1 CG ROM: Japanese,
Korean |